Frigidaire FER331AS0 Dryer Parts

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

This Frigidaire heating element assembly is a genuine replacement part for dryers, ensuring smooth operation and perfectly dry clothes. Compatible with various models.

The coil can also be purchased without the housing and ceramic isolators. However, we recommend replacing it as a whole assembly, as a broken isolator can cause the element to fail.

Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced

Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.

Door Catch

Dryer high-limit thermostat, L260-70F. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element. If the high-limit thermostat has blown, the dryer won't heat.

Use a multimeter to test your high-limit thermostat for continuity.

Bearing cup for drum support ball

The Frigidaire Blower Wheel and Housing Assembly 131775600 is a high-quality replacement part that blows air through the dryer drum and out through the exhaust. It replaces several other part numbers. When repairing use caution. Consult the owner's manual for instructions and to verify part number.

Idler pulley assembly for dryer drum belt

Start switch, dryer, turn type

Knob for selector switches on washing machines and dryers. Fits onto a D-shaped shaft. Includes shaft spring to hold knob in place.

Idler Pulley Spring

Door strike