Refine Selection Here:
Item # 1156784
Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.
OEM Part - Manufacturer #134503600
Item # 1851
Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.
OEM Part - Manufacturer #5303281153
Item # 12912
Dryer door catch kit. If the dryer does not latch properly then either the strike or catch is likely damaged and will need to be replaced.
OEM Part - Manufacturer #5366021400
Item # 407685
Dryer heating element and rear housing assembly. Before checking the heating element, first make sure that the thermal fuse is not defective. Normally, a heating element will have a break in the coil if defective.
OEM Part - Manufacturer #131553900
Item # 1482960
Dryer drum drive belt, 5 rib
OEM Part - Manufacturer #134719300
Item # 4961000
Dryer drum support roller assembly
OEM Part - Manufacturer #5304523155
Item # 1198622
Dryer maintenance kit. The kit includes the rear bearing, front felt seals, belt and idler pulley. This dryer maintenance kit contains all of the parts that are commonly worn when the dryer is noisy.
OEM Part - Manufacturer #5304457724
Item # 2629362
Dryer drum glide. These drum glides help to support the front of the dryer drum as it rotates. Sold individually. It is recommended to replace both at one time.
OEM Part - Manufacturer #137513300
Item # 1489053
Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced
OEM Part - Manufacturer #134120900
Item # 1482984
Dryer heating element assembly. 5500 Watt 3 coil element with housing. If the dryer does not heat check for a blown themal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.
OEM Part - Manufacturer #134792700
Item # 343
Front upper felt glide pad. Includes nylon glides, adhesive, and installation instructions. These drum glides help to support the front of the dryer drum as it rotates.
OEM Part - Manufacturer #5303937139
Item # 3449
Dryer gas valve solenoid coil kit. The kit includes both 2 and 3 wire coils. If the dryer does not heat or heats intermittently the gas valve coils may be defective.
OEM Part - Manufacturer #5303931775