Frigidaire F31C546CS0 Dryer Parts

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced

Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.

Door Catch

Dryer heating element and housing assembly. If the dryer does not heat check for a blown themal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

Bearing cup for drum support ball

Door strike

Air duct seal

Heating element coil

Selector Knob

Screw, pan head, 8-18b x 0.31

This is a Genuine Replacement Part,The Model Number and Name for The Following Item: Frigidaire (FRIGB) 131777700 Dryer - Spacer

The Frigidaire Control Knob 134011703 is a high-quality part that allows for easy control of cycle settings. It is approximately 3 inches in diameter and can be easily removed for service or repair. When repairing use caution. Consult the owner's manual for instructions and to verify part number.