Frigidaire GSE746RFS1 Dryer Parts

This Frigidaire heating element assembly is a genuine replacement part for dryers, ensuring smooth operation and perfectly dry clothes. Compatible with various models.

The coil can also be purchased without the housing and ceramic isolators. However, we recommend replacing it as a whole assembly, as a broken isolator can cause the element to fail.

Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.

Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced

Door Catch

Dryer high-limit thermostat, L260-70F. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element. If the high-limit thermostat has blown, the dryer won't heat.

Use a multimeter to test your high-limit thermostat for continuity.

Bearing cup for drum support ball

Start switch, dryer, turn type

Heating element coil with terminal ends

Idler Pulley Spring

Air duct seal

Frigidaire lint filter. This catches lint from your cloths during drying cycles

Screw, 10-16

Main terminal block for power cord