Frigidaire Dryer Parts

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

OEM Part - Manufacturer #5303281153

Dryer drum drive belt, 5 rib

OEM Part - Manufacturer #134719300

The felt door seal is a replacement part for dryers that ensures proper heat retention during the drying process. It is easy to install and helps to keep the contents of the dryer warm, dry, and cozy.

OEM Part - Manufacturer #5303937183

Lint filter assembly. Part has been redesigned. If you are replacing this filter you may also need to replace housing as well. Please see model diagram for correct housing.

OEM Part - Manufacturer #5304529766

Door catch kit

OEM Part - Manufacturer #5366021400

Dryer drum glide. These drum glides help to support the front of the dryer drum as it rotates. Sold individually. It is recommended to replace both at one time.

OEM Part - Manufacturer #137513300

Your dryer has two drum glides. Because the drum glides wear out at the same time, we recommend replacing them together.

This Frigidaire heating element assembly is a genuine replacement part for dryers, ensuring smooth operation and perfectly dry clothes. Compatible with various models.

OEM Part - Manufacturer #131553900

The coil can also be purchased without the housing and ceramic isolators. However, we recommend replacing it as a whole assembly, as a broken isolator can cause the element to fail.

Dryer drum support roller assembly

OEM Part - Manufacturer #5304523155

This is a genuine replacement part. The model number and name for the following item is: Drum Slide Glide or Pad 5303937139 Frigidaire drum tub

OEM Part - Manufacturer #5303937139

Your dryer has two drum glides. Because the drum glides wear out at the same time, we recommend replacing them together.

The Frigidaire Blower Wheel and Housing Assembly 131775600 is a high-quality replacement part that blows air through the dryer drum and out through the exhaust. It replaces several other part numbers. When repairing use caution. Consult the owner's manual for instructions and to verify part number.

OEM Part - Manufacturer #131775600

Dryer heating element assembly. 5500 Watt 3 coil element with housing. If the dryer does not heat check for a blown themal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

OEM Part - Manufacturer #134792700

Dryer gas valve solenoid coil kit. The kit includes both 2 and 3 wire coils. If the dryer does not heat or heats intermittently the gas valve coils may be defective.

OEM Part - Manufacturer #5303931775

Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced

OEM Part - Manufacturer #134120900