Electrolux Washer/Dryer Combo Parts

Striker, door/lock/switch

OEM Part - Manufacturer #131763310

If your washing machine has a moldy or musty odor, we recommend cleaning it with Affresh washing machine cleaner.

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

OEM Part - Manufacturer #5303281153

Door lock & switch assembly

OEM Part - Manufacturer #131763256

Make sure the door strike is not damaged.

The felt door seal is a replacement part for dryers that ensures proper heat retention during the drying process. It is easy to install and helps to keep the contents of the dryer warm, dry, and cozy.

OEM Part - Manufacturer #5303937183

Washer drive belt. If this belt is broken, the washer will not spin or agitate.

OEM Part - Manufacturer #134511600

The tension pulley may also be worn.

Dryer lint trap. Proper air flow is critical to dryer operation so the filter should be cleaned before every load. Replace the filter if it has any tears or rips in it.

OEM Part - Manufacturer #5304516871

Door catch kit

OEM Part - Manufacturer #5366021400

Dryer drum glide. These drum glides help to support the front of the dryer drum as it rotates. Sold individually. It is recommended to replace both at one time.

OEM Part - Manufacturer #137513300

Your dryer has two drum glides. Because the drum glides wear out at the same time, we recommend replacing them together.

Washing machine drain pump. On some models you will need to configure the replacement pump to match the old pumps outlet port direction and reuse the old mounting bracket. If the washer does not drain then the drain pump may be clogged, damaged, or defective.

OEM Part - Manufacturer #137221600

This is a genuine replacement part. The model number and name for the following item is: Drum Slide Glide or Pad 5303937139 Frigidaire drum tub

OEM Part - Manufacturer #5303937139

Your dryer has two drum glides. Because the drum glides wear out at the same time, we recommend replacing them together.

Dryer gas valve solenoid coil kit. The kit includes both 2 and 3 wire coils. If the dryer does not heat or heats intermittently the gas valve coils may be defective.

OEM Part - Manufacturer #5303931775

Bellow spring clamp

OEM Part - Manufacturer #134616300

Idler pulley and arm, dryer

OEM Part - Manufacturer #5304507499