Parts

Oven igniter with wire harness

Oven temperature sensor *May require cutting and splicing wire connector from old sensor onto new sensor with porcelain wire nuts

Oven control board. If the oven does not heat check if the oven igniter is glowing. If so, the board is likely good and the oven igniter is weak and will need to be replaced. If it is not glowing the igniter and gas valve can be tested. If they test ok, then the board is likely the problem.

Clock overlay, black. Clock control sold seperately

Burner head screw

Foot Assembly

Conversion kit for allowing range to be converted to LP from Natural gas. Includes instructions.

Converting a gas range from natural gas to LP or vice versa is something we recommend be done by a qualified appliance repair person due to the volatile nature of gas and the potential for serious injury, if a problem occurs.

White clock overlay

Door or drawer handle, white

Burner control knob, black

Screw, igniter mounting

Orifice, top burner, 9.5K, Natural

Power cord assembly, gas range