ATFB6700FS0 Parts

Door lock & switch assembly

Make sure the door strike is not damaged.

Door boot seal

Washing machine drain pump. On some models you will need to configure the replacement pump to match the old pumps outlet port direction and reuse the old mounting bracket. If the washer does not drain then the drain pump may be clogged, damaged, or defective.

Shock mounting pin

Washer water inlet valve with thermistor. If the washer fills slowly or does not fill at all, then the water valve may be restricted and require replacement.

Consider replacing your old fill hoses while you are installing the new valve.

Washing machine shock absorber kit. The shock absorbers dampen the vibration of the washer tub. If one or more of the shock absorbers are worn out, the washer will vibrate or shake.

If an extra pin is needed see Recommended Parts

Gasket, dispenser-to-valve

Drain hose 98" long

Frigidaire 134370000 Drawer for Washing Machine. This part works with the following models: Frigidaire ATF6000ES0, Frigidaire ATF6000ES1, Frigidaire ATF6000FS, Frigidaire ATF6000FS0. Genuine replacement part.

Outer door panel

Leveling leg

Screw, 10-16

Washer motor control board. This part contains the board, bracket, tape and screw mounted on control. NOTE: This part is often misdiagnosed.