Kelvinator Heating Element Parts

Stove top coil surface heating element, 8 inch. If the element does not heat either it or the control switch is defective. The coil can be tested to determine if it is at fault.

OEM Part - Manufacturer #316442300

If the element operates intermittently we recommend replacing both the element and it's receptacle.

Dryer heating element and rear housing assembly. Before checking the heating element, first make sure that the thermal fuse is not defective. Normally, a heating element will have a break in the coil if defective.

OEM Part - Manufacturer #131553900

The coil can also be purchased without the housing and ceramic isolators. However, we recommend replacing it as a whole assembly, as a broken isolator can cause the element to fail.

Range/stove surface element (6-inch). If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.

OEM Part - Manufacturer #318372210

If the heating element operates intermittently, the element receptacle may be defective.

8 Inch electric coil surface element with looped terminals, 2600 watts. 5 turns. If the surface element does not have continuity (an unbroken electrical circuit), the surface element won't heat.

OEM Part - Manufacturer #316442301

The element receptacle (or terminal block) wears out over time. If the surface element is defective, you may want to replace both the surface element and the receptacle.

Dryer heating element and housing assembly. If the dryer does not heat check for a blown themal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

OEM Part - Manufacturer #131475320

Dishwasher heating element

OEM Part - Manufacturer #154825001

Oven bake heating element with push-on wire terminals. If the oven won't heat, the bake element may have burned out. Often, if the bake element has burned out, it will be visibly damaged.

OEM Part - Manufacturer #5303051519

6-inch electric coil surface element with looped terminals, 1250 watt, 4 turn. If the surface element does not have continuity (an unbroken electrical circuit), the surface element won't heat.

OEM Part - Manufacturer #318372211

To determine if the surface element is defective, use a multimeter to test it for continuity.

Radiant surface element, 6-inch 1200 Watts

OEM Part - Manufacturer #318178110

Dual surface element, 9 inches/ 6 inches. 1200/2500 watt

OEM Part - Manufacturer #316555800

Oven bake element. If the oven won't heat, the bake element may have burned out. If the bake element has burned out, it will often be visibly damaged. Inspect the bake element for holes or blisters.

OEM Part - Manufacturer #316225001

Broil element

OEM Part - Manufacturer #316203200

Watch our “Part Testing” video to determine if the bake or broil element has burned out and needs to be replaced.

Radiant surface element, 9-inch 2500 Watt

OEM Part - Manufacturer #316135401