Kenmore Heating Element Parts

Dishwasher heating element

Dual radiant surface element, 9 inches/6 inches, 3000 watts

8 Inch electric coil surface element with looped terminals, 2600 watts. 5 turns

The element receptacle (or terminal block) wears out over time. If the surface element is defective, you may want to replace both the surface element and the receptacle.

Defrost heating element

8 Inch electric coil surface element with looped terminals, 4 turns

If the element operates intermittently we recommend replacing both the element and it's receptacle.

This Frigidaire heating element assembly is a genuine replacement part for dryers, ensuring smooth operation and perfectly dry clothes. Compatible with various models.

The coil can also be purchased without the housing and ceramic isolators. However, we recommend replacing it as a whole assembly, as a broken isolator can cause the element to fail.

6-inch electric coil surface element with looped terminals, 1250 watt, 4 turn, black center cap

To determine if the surface element is defective, use a multimeter to test it for continuity.

Oven bake element. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.

Range/stove surface element (6-inch). If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.

If the heating element operates intermittently, the element receptacle may be defective.

Dryer heating element and housing assembly. If the dryer does not heat check for a blown themal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

Radiant surface element, 6-inch 1200 Watts

Radiant surface element, 9-inch 2500 Watt

Dryer heating element assembly. 5500 Watt 3 coil element with housing. If the dryer does not heat check for a blown themal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.