- 1-888-343-4948
- My Orders
- Cart 0 item(s)
Refine Selection Here:
Item # 2893
Dryer cycling thermostat with internal bias heater, L155-25. If the dryer won't heat, it is unlikely that this thermostat is causing the issue, as the thermal fuse or thermal cut-out normally fail first.
OEM Part - Manufacturer #WP3387134
Item # 898078
Dryer high-limit thermostat, L250-80, with terminal extension arm. This thermostat should be closed for continuity at room temperature and opens at around 250 degrees Fahrenheit. If the dryer won't heat, the high-limit thermostat might be defective.
OEM Part - Manufacturer #WP3977767
Item # 1268365
Dryer high limit thermostat assembly. The thermostat has reset button in center it is trips due to poor air flow such as a clogged exhaust vent.
OEM Part - Manufacturer #6931EL3003C
Item # 904589
Cycling thermostat, with internal-bias heater L155-25F
OEM Part - Manufacturer #WP8318268
Item # 1257108
High limit thermostat, L225-40F
OEM Part - Manufacturer #WPW10116735
Item # 508516
Dryer high-limit thermostat, L260-70F. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element. If the high-limit thermostat has blown, the dryer won't heat.
OEM Part - Manufacturer #3204267
Item # 1180102
Hi-limit thermostat & thermistor assembly on heating element housing, L295-80F Thermistor should read around 50 to 60Kohms at room temperature.
OEM Part - Manufacturer #WP8557403
Item # 1122485
Dryer high-limit thermostat, L260-50F. If the dryer overheats, the high-limit thermostat cuts off power to the heating element. If the dryer won't heat, the high-limit thermostat might be defective.
OEM Part - Manufacturer #WP35001092
Item # 2895
Adjustable dryer cycling thermostat kit L135-155. The cycling thermostat cycles the heat on and off to regulate the air temperature. If the cycling thermostat is defective, the dryer will not heat. To determine if the thermostat is defective, use a multimeter to test it for continuity.
OEM Part - Manufacturer #WP694674
Item # 2924
High-limit thermostat, 2 wire, 250 degree limit, 60 degree cool down before reset. The high-limit thermostat cuts off power to the dryer if it overheats. If the thermostat has tripped, the dryer will not heat. To determine if the thermostat is defective, use a multimeter to test it for continuity.
OEM Part - Manufacturer #WP3390291
Item # 481330
High-limit thermostat L200-30
OEM Part - Manufacturer #WP303396
