Oven/Microwave Combo Coil Surface Element

8 Inch electric coil surface element with looped terminals, 2600 watts. 5 turns. If the surface element does not have continuity (an unbroken electrical circuit), the surface element won't heat.

OEM Part - Manufacturer #316442301

The element receptacle (or terminal block) wears out over time. If the surface element is defective, you may want to replace both the surface element and the receptacle.

Surface coil element replacement kit, 2 eight inch elements, 2 six inch elements, four receptacles and related hardware. If the terminal blocks and surface elements on your stove top are in bad shape this is the perfect kit to refresh the appliance.

OEM Part - Manufacturer #4392061

6-inch electric coil surface element with looped terminals, 1250 watt, 4 turn. If the surface element does not have continuity (an unbroken electrical circuit), the surface element won't heat.

OEM Part - Manufacturer #318372211

To determine if the surface element is defective, use a multimeter to test it for continuity.

Stove top coil heating element. The element is 8" in diameter. If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.

OEM Part - Manufacturer #WB30M2

Consider replacing the terminal block that the coil plugs into. If the element was heating intermittently, there is a good chance the terminal block needs replacement.

Stove top coil heating element. The element is 6" in diameter. If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.

OEM Part - Manufacturer #WB30M1

Watch our “Part Testing” video to determine if the surface coil element has burned out and needs to be replaced.

Surface heating element with looped terminal ends. 8-inch diameter. If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.

OEM Part - Manufacturer #WB30X253

6 Inch diameter surface heating element with looped terminal ends

OEM Part - Manufacturer #WB30X254

Watch our “Part Testing” video to determine if the surface coil element has burned out and needs to be replaced.