Tappan Range/Stove/Oven Temperature Sensor

Oven temperature sensor *May require cutting and splicing wire connector from old sensor onto new sensor with porcelain wire nuts

OEM Part - Manufacturer #316233903

Oven temperature sensor

OEM Part - Manufacturer #316217002

Oven sensor *Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.

OEM Part - Manufacturer #316490001

Oven temperature sensor. This part may be different than your original. Instructions are included to help with the repair. See below for a brief set of instructions

OEM Part - Manufacturer #5304497424

These instructions only apply if the connector piece is different than your original.<br>Prior to cutting the leads, please check the length of the wire you need.<br>1. Cut the leads on your original sensor and the replacement sensor. Be sure to leave enough length to strip and splice the new probe and original connector together.<br>2. Strip the insulation, or wire cover, back approximately 1/4 inches on the new probe and original connector.<br>3. Twist the ends of your new probe and original connector together<br>4. Use a wire nut, or another high heat fastener to cover your exposed wires.<br>5. Install your new oven probe and re assembly your oven.

Oven Sensor

OEM Part - Manufacturer #115T563P03

Oven sensor

OEM Part - Manufacturer #318087701

Oven Sensor

OEM Part - Manufacturer #5303011684

Oven Sensor

OEM Part - Manufacturer #5303306848